Opening washing machine's door at the beginning of wash cycle
Resolution
The door normally can be opened before the heating phase or when the height of water in the drum is low (during the first 10 minutes). Try to add more laundry.
Warning: If the door can be opened during a wash or spin cycle, when the washing machine is filled up with water, switch off the power supply to the appliance immediately. Do not use the washing machine until the problem is solved. Contact an Authorized Service Center.
Was this article helpful?
Related Articles
- Washing machine displays padlock - AEG
- Washing machine does not work / does not react
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- The door of the washing machine cannot be opened
- Recently installed washing machine does not start
- Washing machine does not heat water, and does not display an error message
- Using liquid detergent / What is the flap in my washing machine dispenser for?
- Washing machine displays error message EHO / EH0
- Cleaning the washing machine’s rubber seal if it's dirty
Related Articles
- Washing machine displays padlock - AEG
- Washing machine does not work / does not react
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- The door of the washing machine cannot be opened
- Recently installed washing machine does not start
- Washing machine does not heat water, and does not display an error message
- Using liquid detergent / What is the flap in my washing machine dispenser for?
- Washing machine displays error message EHO / EH0
- Cleaning the washing machine’s rubber seal if it's dirty