Hob displays error message E6 / E641
Resolution
Issue:
- Electric hob displays error message E6 or E641.
Applies to:
- integrated electric hob
- freestanding cooker with electric hob
Resolution:
1. Contact the qualified electrician who installed the appliance.
2. Contact an Authorized Service Center.
If the above advice do not resolve the problem, we recommend requesting a visit by a service engineer.
Cause:
- Error message E6 or E641 indicates the appliance is connected to one phase only.
Was this article helpful?
Related Articles
- Gas hob - Ignition issues
- When switched the gas hob OFF and ON the message F appears, burners cannot be ignited
- My hob does not turn on
- How to turn off DEMO mode in Electronic gas hob?
- Hot plate switches itself off / beeps
- Hob display flashes between two figures / stuck on simmer / unable to use all zones at the same time
- Hob displays message F
- What cookware is suitable for cooking zones with induction heating?
- The stainless steel frame of the ceramic hob gets very hot
- The SenseBoil function does not work in my Electrolux induction hob