Hob blows/ trips fuse
Issue
- Hob / cooker continuously blows / trips the fuse
Applies to:
- Induction hobs
- Electric (ceramic) hobs
- Gas hobs
Resolution
1. Make sure that the fuse is sufficient for the power load.
Check with your electrician if you have the right fuse size and if the hob is connected to a separate fuse group.
2. Check if the appliance is correctly connected to the electrical supply.
Ensure a correct installation by calling an authorized installer.
3. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- When activating the inner zone of a cooking field, it appears that the outer zone is also heating
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- What cookware is suitable for cooking zones with induction heating?
- Hot plate switches itself off / beeps
- AEG SaphirMatt® Hob with scratch-resistant surface - cleaning instructions
- How to use the child lock and lock function on your AEG induction hob
- My hob does not turn on
- How to use the FlexiBridge function on your AEG induction hob
- How to use the food sensor with your AEG SensePro® hob
- How to use the frying function on your AEG SenseFry hob