Why is there water or moisture is in my washing machine before the first use?
Issue
- Why is there water or moisture is in my washing machine before the first use?
Applies to:
- Washing machines
Resolution
Each washing machine is subjected to a functional test during the final inspection in which a washing program is simulated.
- As a result of this, there may be some water or moisture in the new device.
- There is no error.
- It is also not a used device.
Was this article helpful?
Related Articles
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Washing machine displays error message E90, E91, E92, E93 or E94
- Washing machine displays error message E30, C3 or emits 3 beeps
- How to clean the washing machine detergent drawer
- The door of the washing machine cannot be opened
- How to drain a washing machine/washer dryer
- Connected appliances - The application cannot connect to the appliance
- Washing machine blows fuses / trips RCD circuit breaker
- How to reset WiFi network settings on my Electrolux washing machine?