Water leaking from dishwasher door
Issue
Water leaking from dishwasher door.
Resolution
Where water is leaking out of the bottom of the dishwasher, check the following -
- Rinse aid spillage? Ensure that any spillage of rinse aid has been cleaned and wiped away. Failure to complete this may create a high foam content that can leak through the door seal.
- Is the appliance level? If the appliance is 'leaning' forward, this will cause water to leak through the bottom of the door. Check that the appliance is level by adjusting the adjustable feet at the front. The appliance should be level front-to-back, and side-to-side. Use a spirit level to ensure that the appliance is correctly positioned.
- Door 'centred' on the tub?Where the door is not 'square' with the tub, this can cause water to leak out. Ensure the appliance is level. For 'Built-in' appliances, ensure that the middle foot is adjusted (where applicable).
- Ability to close the door of the dishwasher? Ensure that the appliance is loaded correctly and that none of the contents within are protruding and causing pressure on the door, restricting it from closing completely.
- Door seal within the tub? Check that the door seal has not disengaged from the tub interior or become damaged.
Cause:
- Spilt rinse aid.
- Appliance not level.
- Appliance installed incorrectly.
- Incorrect loading of the appliance.
Was this article helpful?
Related Articles
- Dishwasher displays error message iF0, iFo or iF1
- Symbols & programmes on your AEG dishwasher
- Dishwasher is making unusual noises
- Dishwasher displays error message C2, F2, i20, AL6, beeps 2 times or LED flashes 2 times
- Rust spots on cutlery after washing in the dishwasher
- Dishwasher does not / will not start but the power is on
- Water is being filled into the dishwasher even when it is turned off
- Dishwasher displays error code iC0 - Causes and Fixes
- Dishwasher does not switch on, no light on the panel
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
Related Articles
- Dishwasher displays error message iF0, iFo or iF1
- Symbols & programmes on your AEG dishwasher
- Dishwasher is making unusual noises
- Dishwasher displays error message C2, F2, i20, AL6, beeps 2 times or LED flashes 2 times
- Rust spots on cutlery after washing in the dishwasher
- Dishwasher does not / will not start but the power is on
- Water is being filled into the dishwasher even when it is turned off
- Dishwasher displays error code iC0 - Causes and Fixes
- Dishwasher does not switch on, no light on the panel
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher