Washing machine display does not show the wireless indicator
Resolution
Issue:
- The display does not show the wireless indicator
- Cannot connect to the appliance
Applies to:
- connected washing machine
- connected tumble dryer
Resolution:
1. Check the wireless signal.
2. Make sure that the wireless connection is on.
Refer to the paragraph "Configuring the washing machine wireless connection" in the "WiFi - Connectivity setup" chapter in the user manual. You can download the user manual .
3. Check your home network and router.
4. Restart the router.
5. Contact your wireless service provider if there are further problems with the wireless network.
Was this article helpful?
Related Articles
- The door of the washing machine cannot be opened
- Connected appliances - The application cannot connect to the appliance
- Connected appliances - problems with onboarding
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Why is there water or moisture is in my washing machine before the first use?
- Washing machine's door opens during cycle
- Washing machine's door can be opened and water runs out onto the floor
- Washing machine produces pale streaks on laundry or emits a sour smell
- The new washing machine shows visible signs of damage
- Washing machine blows fuses / trips RCD circuit breaker