Tumble dryer does not work /  does not react

Issue

• Tumble dryer does not work/does not react
• No reaction for switch ON/OFF button
• Abnormal work of the appliance
• The appliance seems dead - not functioning or lighting up when attempting to use it.

Applies to:

• Tumble dryer 

Resolution

Check Power Supply

• Ensure the dryer is properly plugged in.
• Test the outlet with another device (i.e. table lamp) to confirm it’s working.
• Check the circuit breaker or fuse box for any tripped switches.

Inspect the Door

• Make sure the door is fully closed. Most dryers won’t start if the door isn’t securely shut.
• Check for any damage or misalignment in the door latch.

Control Panel or Buttons

• Try pressing the power/start button firmly.
• If the panel is unresponsive, check for a child lock (padlock symbol on display) feature that may be activated.
• Disable the lock by pressing and holding the indicated button or button combination for 3–5 seconds.

Reset the Dryer

• Unplug the dryer for 30 seconds, then plug it back in.

Check the Settings

• Ensure a drying cycle is selected.
• Make sure that Delay Start mode is not activated.

Overheating Protection

• If the dryer overheated previously, it may have triggered a safety shut-off. Let it cool down for 30–60 minutes before trying again.

Filter and Condenser Check

• Clean the lint filter and the condenser. Refer to the article: Cleaning dryer filter and condenser.
• Poor airflow can prevent the dryer from operating properly.

Error Codes

• If the display shows an error code, refer to the user manual for its meaning and recommended action.

If the appliance is still not working contact the Authorised Service Centre.

Cause:

• In some specific cases caused by interferences in the power supply, electronic devices can stop working normally or even not react to ON/OFF button