How to reset WiFi network settings on my AEG dryer
Issue
- How to reset WiFi network settings on my AEG dryer?
Applies to:
- AEG tumble dryers with WiFi connection
Resolution
Depending on the model of the dryer, follow the steps below
8000 series tumble dryer
2. Tap on the WiFi bar, and a new menu is shown.
3. Tap on Reset network
9000 series tumble dryer
1. Press and hold the Time Drying and Refresh buttons for at least 10 seconds simultaneously until the second acoustic signal.
- - - appears on the display
1. To remove the wireless credentials, touch and hold down the Remote Start button for around 10 seconds until you hear 2 'beeps' sound. The symbol: - - - appears on the display
Further information can be found in the .
Was this article helpful?
Related Articles
- Start - Pause LED flashes on tumble dryer
- Tumble dryer displays error message "Err"
- AEG Tumble dryer stops after a few minutes of the cycle
- Tumble dryer does not start / does not work
- Tumble dryer is leaking
- Tumble dryer displays error message E40
- Tumble dryer displays error message E60 and does not heat up
- Tumble dryer's Condenser LED is on
- Tumble dryer displays error message E50
- Tumble dryer not drying, not drying properly, too long drying