The oven takes a long time to activate from standby and shows three dots on the display
Issue
When pressing the ON button of the oven on standby, it takes some seconds until the oven is ready to be used.
There are three dots shown in the oven display (as shown below).
The oven takes longer than expected to turn on
Resolution
The issue can be resolved by connecting the appliance to the WiFi network.
You can find information on how to connect your appliance to your WIFI in the user manual chapter “Wireless connection”.
After connecting the appliance to your WiFi, the issue should be resolved.
Was this article helpful?
Related Articles
- Oven displays SAFE or padlock symbol
- Electric grill - open door grilling
- Grill pan handle requests
- How to use the Steam Cleaning function on your AEG steam oven
- How to set a cooker timer (duration) / minute minder
- How to Set the Oven Clock
- Oven clock flashes or displays "0:00" - AEG
- Oven display shows PYR
- Oven light does not work
- How To Remove Oven Shelf Supports For Cleaning
Related Articles
- Oven displays SAFE or padlock symbol
- Electric grill - open door grilling
- Grill pan handle requests
- How to use the Steam Cleaning function on your AEG steam oven
- How to set a cooker timer (duration) / minute minder
- How to Set the Oven Clock
- Oven clock flashes or displays "0:00" - AEG
- Oven display shows PYR
- Oven light does not work
- How To Remove Oven Shelf Supports For Cleaning