How to Set the Oven Clock

Issue

If the clock on your oven is flashing, showing the wrong time, displaying 12:00 or 00:00, or needs to be updated after a power interruption or a seasonal clock change, you may need to set the clock.

Many ovens require the correct time to be set before certain timer functions become available.

Typical signs:

• The clock display is flashing
• The oven shows the wrong time
• The display shows 12:00 or 00:00
• The time resets after a power supply cut
• The clock is one hour ahead or behind
• Timer functions are unavailable

Applies to:

• Ovens
• Cookers

Resolution

Follow the steps below.

Set the clock

The method for setting the clock varies depending on the control panel fitted to your oven. Different models may use touch controls, rotary dials, a command wheel, or dedicated clock buttons.

Refer to the instructions in your user manual for the exact steps applicable to your model.

Update the clock after daylight saving time changes

Many ovens do not automatically switch between daylight saving time (summer time) and standard time (winter time).

When the clocks change:

• In spring, you may need to move the oven clock forward by one hour.
• In autumn, you may need to move the oven clock back by one hour.

If the displayed time is one hour ahead or behind after the seasonal time change, adjust the clock manually using the instructions in your user manual.

This is normal operation and does not indicate a fault with the oven.

Find the correct user manual

If you are unsure how to set the clock on your oven, download the user manual for your specific model.

1. Open the oven door.
2. Locate the data plate on the oven frame.
3. Find the model number and PNC (Product Number Code).
4. Go to the User Manual download page.
5. Enter the PNC number in the search field.
6. Download the manual for your oven model.
7. Search the manual for "Clock", or "Clock Functions".

Using the PNC ensures you download the correct manual for your oven.

Important

• A flashing clock does not normally indicate a fault.
• The clock may need to be set after installation or a power interruption.
• Many ovens require the correct time to be set before timer-related functions become available.
• Some models do not automatically adjust for daylight saving time changes.

When Is It Not A Fault?

The following situations are considered normal operation:

• The clock flashes after the oven is installed.
• The clock displays 12:00 or 00:00 after installation or a power interruption.
• The clock resets after a power cut.
• The clock resets after the oven has been disconnected from the power supply.
• The displayed time needs to be adjusted when switching between summer time and winter time.
• Timer functions are unavailable until the clock has been set.

Cause:

FAQ – Setting the oven clock

Why is my oven clock flashing?

A flashing clock usually indicates that the time has not been set after installation or a power supply cut.

Why does my oven show 00:00?

The stored time setting was lost and needs to be set again.

Why does my oven show 12:00?

Many oven models display a default time when the clock has not been set or due to earlier power cut

How do I change the clock after daylight saving time?

Follow the clock-setting instructions in your user manual.

Is a flashing clock a fault?

No. In most cases it is normal behaviour following a power interruption.

Do I need service if I cannot set the clock?

Service may be required if the display or control panel does not respond after following the instructions in the user manual.