Oven blows / Trips fuses
Issue
- Oven / Cooker blows / trips the fuse
Applies to:
- Integrated oven
- Single Oven
- Double Oven
- Combination Oven
- Microwave Oven
- Freestanding cooker
Resolution
- If the appliance has recently been installed or a new appliance has been added to the same circuit, this could indicate an installation error. In this instance we would recommend contacting your installer or electrician
- To check which appliance is causing the fault, turn off as many other appliances as possible, switch the power back on at the consumer unit switch the oven back on. This will determine if there is a fault with the oven or if there are too many appliances on the circuit.
If the above advice does not resolve the problem, we recommend a visit by a service technician. Contact our team to arrange a repair.
Was this article helpful?
Related Articles
- How to Set the Oven Clock
- Oven clock flashes or displays "0:00" - AEG
- Oven displays SAFE or padlock symbol
- Oven display shows PYR
- Oven light does not work
- How To Remove Oven Shelf Supports For Cleaning
- Oven displays error code (F and number)
- Download AEG User Manual
- Oven displays error message F11 / F111
- After a short power failure, Demo appears in the display and my oven will not heat up
Related Articles
- How to Set the Oven Clock
- Oven clock flashes or displays "0:00" - AEG
- Oven displays SAFE or padlock symbol
- Oven display shows PYR
- Oven light does not work
- How To Remove Oven Shelf Supports For Cleaning
- Oven displays error code (F and number)
- Download AEG User Manual
- Oven displays error message F11 / F111
- After a short power failure, Demo appears in the display and my oven will not heat up