Oven displays error message F1
Resolution
For appliances with pyrolytic cleaning:
If the oven's display shows the error message F1 it indicates that the oven door cannot close because the pyrolytic function is ON.
- Check if the top part of the door is intact and secured properly to the door.
- Another possible cause: the door was recently cleaned or detached. Refer to the user manual to find out the correct assembly instructions for the door.
- If this doesn’t fix the problem, we recommend contacting an Authorized Service Center.
For appliances without pyrolytic cleaning:
If the oven's display shows the error message F1 the possible cause is an electronic fault.
- To investigate the problem, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- Measuring internal temperature when roasting / cooking meat
- How To Remove Oven Shelf Supports For Cleaning
- How to set a cooker timer (duration) / minute minder
- Oven displays error code (F and number)
- Resetting PYR or CATA on the oven's display
- Symbols and functions on your AEG oven or cooker
- The steam cooking does not work
- Oven pyrolytic self - cleaning function gives poor results
- Oven clock flashes or displays "0:00" - AEG
- How to use Pyrolytic Cleaning on your AEG oven