Oven displays error code F602 or F603
Resolution
Issue:
- Oven displays error code F602 or F603
Applies to:
- built-in connected oven
Resolution:
1. Turn the oven off and on.
DISPLAY CODE | DESCRIPTION |
F602, F603 | Wifi signal is not available |
2. When one of these error messages continues to appear on the display, it means a faulty subsystem may have been disabled.
In such a case contact your dealer or an Authorized Service Center.
If one of these errors occurs, the rest of the oven functions will continue to work as usually.
Was this article helpful?
Related Articles
- Electric grill - open door grilling
- Temperature on the oven's display differs from the measured temperature
- Steam oven uses too much water during Sous Vide cooking
- Poor baking / roasting results
- Oven steam self - cleaning function
- Oven pyrolytic self - cleaning function gives poor results
- Oven general use / cleaning tips
- Oven front panel / door gets hot
- Oven displays error message C1, C2, C3 or C4
- Measuring internal temperature when roasting / cooking meat