Oven displays error code F601 or F604
Resolution
Issue:
- Oven displays error code F601 or F604
Applies to:
- built-in oven
Resolution:
1. If your oven displays error message F601 or F604, refer to the suggestions below:
DISPLAY CODE | DESCRIPTION | TROUBLESHOOTING |
F601 | there is a problem with WiFi signal. | Check your network connection. Refer to the user manual, "Before first use" chapter, Wireless connection. |
F604 | the first connection to WiFi failed. | Turn the oven off and on and try again. |
2. When one of these error messages continues to appear on the display, it means a faulty subsystem may have been disabled.
In such a case, contact your dealer or an Authorized Service Center.
If one of these errors occurs, the rest of the oven functions will continue to work as usual.
Was this article helpful?
Related Articles
- Electric grill - open door grilling
- Temperature on the oven's display differs from the measured temperature
- Steam oven uses too much water during Sous Vide cooking
- Poor baking / roasting results
- Oven steam self - cleaning function
- Oven pyrolytic self - cleaning function gives poor results
- Oven general use / cleaning tips
- Oven front panel / door gets hot
- Oven displays error message C1, C2, C3 or C4
- Measuring internal temperature when roasting / cooking meat