Induction hob displays error code F2
Resolution
Issue:
- Error code F2 appears on display of induction hob
- SenseBoil® function does not work
- Cannot activate the SenseBoil® function
Applies to:
- induction hobs with SenseBoil® function
Resolution:
1. Make sure surface of hob is dry.
2. Do not activate any zone with an empty pot on it.
3. Avoid using the function with liquids other than water.
Cause:
- Error code F2 indicates that the pot is empty or it contains some liquid other than water, e.g. oil.
Was this article helpful?
Related Articles
- Gas hob - Ignition issues
- When switched the gas hob OFF and ON the message F appears, burners cannot be ignited
- My hob does not turn on
- How to turn off DEMO mode in Electronic gas hob?
- Hot plate switches itself off / beeps
- Hob display flashes between two figures / stuck on simmer / unable to use all zones at the same time
- Hob displays message F
- What cookware is suitable for cooking zones with induction heating?
- The stainless steel frame of the ceramic hob gets very hot
- The SenseBoil function does not work in my Electrolux induction hob