I can hear a constant beep noise / my oven's display shows 400
Resolution
Issue:
- I can hear a constant beep noise and my oven's display shows "400" after activation. it indicates that the appliance is connected to 400V.
Applies to:
- integrated oven
- freestanding cooker
Resolution:
1. Check if the appliance is correctly connected to the electrical supply.
Refer to the installation instructions provided with the appliance. Ensure a correct installation by calling an authorized installer.
2. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Electric grill - open door grilling
- Temperature on the oven's display differs from the measured temperature
- Steam oven uses too much water during Sous Vide cooking
- Poor baking / roasting results
- Oven steam self - cleaning function
- Oven pyrolytic self - cleaning function gives poor results
- Oven general use / cleaning tips
- Oven front panel / door gets hot
- Oven displays error message C1, C2, C3 or C4
- Measuring internal temperature when roasting / cooking meat