Hood turns on by itself
Resolution
Issue:
- Hood turns on by itself
Applies to:
- cooker hood
Resolution:
1. If the hood turns on by itself, the possible cause is an error in communication between the primary electronic printed circuit board and the control electronics.
- Unplug the hood from the socket.
- Wait 30 seconds, then plug it back in.
- Alternatively, find the power switch and follow the same procedure.
2. Check if there is a problem with the remote control, if applicable.
- Replace the batteries if necessary.
- If the problem persists, remove the batteries and replace the remote control.
3. You can find all necessary accessories in our Webshop.
4. If this doesn't resolve the issue, contact Authorized Service Center.
Was this article helpful?
Related Articles
- Cooker hood stops during use
- Cooker Hood is clogged
- Cooker Hood does not start, does not work
- Cooker hood lighting cannot be switched off
- Cooker hood carbon filters - cleaning, longevity
- The LEDs or lights flash or show an F on the panel of the cooker hood
- The Hob2Hood function does not work with the cooker hood
- Cooker hood light not working
- Cooker Hood remote control does not work
- The cooker hood is damaged / dented / scratched