Hob displays error message E0 / E1
Resolution
Issue:
- Hob displays error message E0 / E1
Applies to:
- integrated electric hob
- integrated induction hob
Resolution:
1. Disconnect the appliance from power for at least 30 seconds.
Reconnect it and switch it back on.
2. Contact an Authorized Service Center.
If the above advice do not resolve the problem, we recommend requesting a visit by a service engineer.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Cause:
- Error message E0 / E1 indicates a fault with the electronics.
Was this article helpful?
Related Articles
- Only one side of the hob is operating
- Hob displays message L
- Hot plate switches itself off / beeps
- How do I connect my electric ceramic or induction hob to the power supply?
- How to use the SenseBoil® function on your AEG induction hob
- How to turn off DEMO mode in Electronic gas hob?
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
- Gas hob displays error message E6
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- Induction hob displays error code F or F1