Gas Hob displays F
Issue
- One or more burners do not ignite
- F appears in one or more of the displays of the gas hob
- F comes on
Resolution
Here is the process to reset burners if an F appears in the display -
Power OFF using this button
Power ON using the same button
When hob display is illuminated, and F reappears touch the PAUSE button
WITHIN 3 SECONDS, then touch the Hob2Hood button
When a 0 is seen in the display
The fault is reset, and you can now light the burners correctly
IMPORTANT: If there is still an issue please check that the Burner Cap (A) Burner Crown (B) are correctly fitted and the metal part of the Flame Safety Device (C) is clean (Use a moist soft cloth or sponge only)
If this does not resolve the issue, then call AEG Service 03445 611611
Was this article helpful?
Related Articles
- Induction hob emits an unusual sound
- What cookware is suitable for cooking zones with induction heating?
- Hot plate switches itself off / beeps
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Induction Hob Installation Faults
- Hob displays error message E8 / E822
- Gas hob - Ignition issues
- How to clean Electrolux induction or radiant hob?
- Hob displays message A
- Hob displays message H
Spare parts & Accessories
Find original spare parts for your appliance in our webshop and have them delivered directly to your door.
Related Articles
- Induction hob emits an unusual sound
- What cookware is suitable for cooking zones with induction heating?
- Hot plate switches itself off / beeps
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Induction Hob Installation Faults
- Hob displays error message E8 / E822
- Gas hob - Ignition issues
- How to clean Electrolux induction or radiant hob?
- Hob displays message A
- Hob displays message H