Drying cycle is too long
Resolution
Issue:
- The drying programme takes longer than specified in the user manual
- Drying time shown on the display does not correspond to real drying time
- After the drying time, which is stated in the user manual, the laundry is still wet
Applies to:
- Heat pump tumble dryer
Resolution:
1. Spin the laundry well before drying (min. 800rpm).
2. Do not exceed the maximum load size.
Note: The indication of loading quantity always refers to the weight of the dry laundry.
3. Choose the right drying programme.
Make sure that the respective type of washing and the care symbols in the label of the laundry comply with the drying program.
You will find help in the program overview in the user manual.
Download .
4. Ensure a room temperature higher than +5°C and lower than +35°C.
Optimal room temperature to achieve best drying results is between 19°-24°C.
5. Clean all filters and the heat exchanger regularly and carefully as described in the user manual.
Download .
Was this article helpful?
Related Articles
- Tumble dryer emits unusual noises
- Twisted Laces in the Dryer
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays error message E60 and does not heat up
- Warning light(s) of tumble dryer cannot be switched off
- AEG Tumble dryer stops after a few minutes of the cycle
- Tumble dryer does not start / does not work
- Tumble dryer displays error message E50
- How long does a full load dry to dry take in a dryer - heatpump vs condenser?
- Tumble dryer emits unpleasant smells