Cooker Hood remote control does not work
Issue
- Cooker hood remote control does not work
- Cannot operate the remote control
Applies to:
- Cooker hoods equipped with remote control
Resolution
1. Replace the batteries in the remote control, if necessary.
2. Make sure the batteries are inserted properly, the button-shaped side is the “-” terminal and the flat side is the “+” terminal.
3. Reset the hood as described in the user manual.
The control unit will then register the hood again.
Download .
4. If this doesn't resolve the issue, contact an Authorized Service Center.
Cause:
- Batteries incorrectly inserted
- Discharged batteries
- Technical problem
Was this article helpful?
Related Articles
- Cooker hood stops during use
- Cooker Hood is clogged
- Cooker Hood does not start, does not work
- Cooker hood lighting cannot be switched off
- Cooker hood carbon filters - cleaning, longevity
- The LEDs or lights flash or show an F on the panel of the cooker hood
- The Hob2Hood function does not work with the cooker hood
- Cooker hood light not working
- Hood turns on by itself
- The cooker hood is damaged / dented / scratched