An acoustic signal is heard and the gas plate switches off by itself
Resolution
Issue:
- An acoustic signal is heard and the gas hob switches off by itself
- An acoustic signal sounds when the hob is deactivated
Applies to:
- Electronic Gas hobs
Resolution:
1. Remove the object from the sensor fields.
2. Avoid touching the sensor field for more than 10 seconds.
Cause:
- You spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates.
Was this article helpful?
Related Articles
- Induction hob emits an unusual sound
- What cookware is suitable for cooking zones with induction heating?
- Hot plate switches itself off / beeps
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Induction Hob Installation Faults
- Hob displays error message E8 / E822
- Gas hob - Ignition issues
- How to clean Electrolux induction or radiant hob?
- Hob displays message A
- Hob displays message H
Related Articles
- Induction hob emits an unusual sound
- What cookware is suitable for cooking zones with induction heating?
- Hot plate switches itself off / beeps
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Induction Hob Installation Faults
- Hob displays error message E8 / E822
- Gas hob - Ignition issues
- How to clean Electrolux induction or radiant hob?
- Hob displays message A
- Hob displays message H