Washing Machine - How to replace the spring suspension

Resolution

missing alt text

Refer always to your product’s user manual safety information before any repair or maintenance operation. https://www.electrolux.com/support/user-manuals/

missing alt text

WARNING! RISK OF ELECTRIC SHOCK

Before any repair or maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

safety - risk of electric shockmissing alt text

WARNING! RISK OF INJURY

safety - gloves and protective footwear

Always take care when moving appliances. For heavy appliances it's safest for two persons to move it. Always use safety gloves and safety footwear. Wear safety gloves at all times to protect from cuts from sharp edges.

missing alt text

WARNING! RISK OF EYE INJURY

missing alt text

Wear safety glasses if you perform maintenance or repair work involving springs.

missing alt text

WARNING! RISK OF PINCHING

missing alt text

Wear safety gloves if you perform maintenance or repair work involving belts.

missing alt text

WARNING! NOT INTENDED FOR CHILDREN

missing alt text

Keep all small parts and packaging out of reach of children under 3 years due to choking hazard. Installation and use should be performed by adults only.

-

Before any maintenance operation, turn off water supply to the appliance. Always empty the appliance of all the water. Any maintenance should be carried out with the appliance standing upright. Residual water could damage electronics if the appliance is placed on any of its sides.

Make sure to use the product only for its designated purpose and verify that it is a compatible part for the intended product.

Do not use or install the product if damaged.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly and might void the warranty. Possessing the necessary know-how is essential.

HOW TO REPLACE SPRING SUSPENSION TUB

1. Unscrew the two 8mm screws on the back of the washing machine lid and slide back to release.

missing alt text

2. Wedge a flat bladed screwdriver under the spring and use it to lever out the spring slightly to hook a strong cable/rope under the spring.

(NOTE: Must be strong enough to hold the weight of the drum).

(It is recommended to take a photo of the position of the spring on the side support and the drum to ensure that the spring is repositioned on the correct notches during reinstallation.)

missing alt text

3. Lift the spring up and away from the appliance side to release.

missing alt text

4. Unhook the spring from the drum support.

missing alt text

5. NOTE: During reinstallation ensure that both hooks of the spring have their plastic support fitted.

missing alt text

6. When assembling, repeat steps in reverse order.

Was this article helpful?

Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.

To the webshop

Book a service

Having issues with your appliance? Book a reliable and professional service from our expert technicians to get your product up and running.

Book a service

Find your product manual

Solve problems and look up instructions or other documentation for your product.

Find manual
Washing Machine - How to replace the spring suspension | AEG