Washer - dryer has visible signs of damage
Resolution
Issue:
- The washer - dryer has damaged or loose components
Applies to:
- washer-dryer
Resolution:
1. Discovering damage when unpacking the appliance:
- Please contact your dealer immediately to notify them that the appliance was damaged during delivery.
- You will find the dealer’s phone number on the invoice or the delivery note.
Warning: Do not attempt to connect or use the appliance.
2. Discovering damage after installing / using the appliance for the first time:
- You should also contact your dealer in this case to notify them of the damage.
3. Requesting a service:
- If you want to replace the component yourself, visit our Webshop.
- If possible, state the component concerned when requesting a service by an Authorized Service Center.
Was this article helpful?
Related Articles
- LED flashes on the washer - dryer's display
- Washer dryer displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washer dryer displays error message E30, C3 or emits 3 beeps
- Wool clothing shrinks after washing in washer - dryer
- Seal on the washer-dryer door is damaged
- Handle of the washer - dryer door is faulty
- Washer dryer displays error message E90, E91, E92, E93 or E94
- Washer dryer displays error message E40 or emits 4 beeps / 4 flashes
- Washer - dryer inlet hose is leaking
- Washer - dryer does not switch on after a drying cycle