Washer dryer displays error message E90, E91, E92, E93 or E94
Resolution
Issue:
- Washer dryer displays error message E90, E91, E92, E93 or E94. It indicates configuration / communication problems with the electronic parts.
Applies to:
- Freestanding washer dryer
- Integrated washer dryer
Resolution:
1. Reset the appliance.
Remove the plug from the socket, wait 30 seconds and then plug it in again.
2. Contact an Authorized Service Center.
If the above suggestion did not solve the problem, we recommend requesting a visit by a service engineer.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Was this article helpful?
Related Articles
- LED flashes on the washer - dryer's display
- Washer dryer displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washer dryer displays error message E30, C3 or emits 3 beeps
- Wool clothing shrinks after washing in washer - dryer
- Seal on the washer-dryer door is damaged
- Handle of the washer - dryer door is faulty
- Washer dryer displays error message E40 or emits 4 beeps / 4 flashes
- Washer - dryer inlet hose is leaking
- Washer - dryer has visible signs of damage
- Washer - dryer does not switch on after a drying cycle