Tumble dryer displays error message E80

Resolution

Issue:

• Tumble dryer displays error message E80. It indicates a problem with the cycle selector or the software

Applies to:

• Vented dryer
• Condenser dryer
• Heat pump dryer

Resolution:

1. Make sure the cycle selector is not set between two programme options.

2. Reset the appliance.

• Remove the plug from the socket, wait 30 seconds and then plug it in again (The same result may be achieved by using the safety switch).
• After plugging in the appliance, switch it on and select a program.

3. Contact an Authorized Service Center.

If the above suggestions did not solve the problem, we recommend requesting a visit by a service engineer.