The display of the dryer shows different running times for the same programme
Resolution
Issue:
- The display of the dryer shows different running times for the same programme
- The actual programme duration differs from the one specified in the user manual
Applies to:
- Heat pump dryer
Resolution:
1. The appliance is working correctly.
The drying duration is calculated according to various parameters, such as:
- ambient temperature
- initial laundry moisture
- load mass and type
The displayed time adjusts to the actual programme duration.
Was this article helpful?
Related Articles
- Cleaning tumble dryer filters and condenser
- Tumble dryer displays error message E50
- AEG Tumble dryer stops after a few minutes of the cycle
- Start - Pause LED flashes on tumble dryer
- Tumble dryer displays error message EHO, EH0
- How long does a full load dry to dry take in a dryer - heatpump vs condenser?
- Tumble dryer's drying results are poor and laundry is damp after drying
- Tumble dryer does not heat up
- Tumble dryer does not stop when the cycle is finished
- Tumble dryer ends the programme immediately after the start