Small marks on washing machine or tumble dryer glass door
Resolution
Issue:
- Small marks on washing machine or tumble dryer glass door
Applies to:
- washing machine
- tumble dryer
Resolution:
1. A small mark in the middle of the outer safety glass is not a malfunction of the machine.
- The mark is the casting point where the plastic is injected into the mold when the glass is produced.
- The outer plastic glass is a safety glass used to prevent burning your fingers when the washing machine washes with hot water, or the tumble dryer dries at high temperatures.
- The mark does not affect the machine’s function or life.
Was this article helpful?
Related Articles
- The door of the washing machine cannot be opened
- Connected appliances - The application cannot connect to the appliance
- Connected appliances - problems with onboarding
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Why is there water or moisture is in my washing machine before the first use?
- Washing machine's door opens during cycle
- Washing machine's door can be opened and water runs out onto the floor
- Washing machine produces pale streaks on laundry or emits a sour smell
- The new washing machine shows visible signs of damage
- Washing machine blows fuses / trips RCD circuit breaker