Robotic vacuum cleaning results are worse than previous cleanings
Issue
- Robotic vacuum cleaning results are worse than previous cleanings
- robotic vacuum cleans poorly
Applies to:
- robotic vacuum cleaner RX-9 series
Resolution
To ensure optimal cleaning results:
1. Check the filter if necessary clean it according to the instructions in the user manual.
- Download .
- For best performance, we recommend to clean the filter after every 5th cleaning and to replace it every 6 months.
2. Check the Brush roll and clean it if necessary, according to the instructions in the user manual.
Download .
3. Check the side brush and clean it if necessary, according to the instructions in the user manual.
Download .
4. Check the air channel.
- Remove the dust container.
- Remove clogged debris in the air channel.
- Put the dust container back into place.
5. Put the robot on the charger and let it fully charge.
This takes about 3 hours. With a full battery the unit will clean for approximately 1 hour in ECO mode.
Was this article helpful?
Related Articles
- Will I need to use another vacuum cleaner apart from the robotic vacuum?
- What happens if a (new) obstacle gets in the area already mapped by the robotic vacuum?
- Starting the robotic vacuum (App Links)
- Robotic vacuum main brush is not working well
- Robotic vacuum stops while running, with no lights, error message or the display is blank
- Robotic vacuum starts to clean just a specific part of the room
- Robotic vacuum makes noise while cleaning /running
- Robotic vacuum doesn’t charge or doesn't seem to finish charging
- If the robotic vacuum gets stuck (under the bed, between the chairs)
- How to proceed when the robotic vacuum is displaying an error message