Installing the robotic vacuum's charge station
Resolution
Please follow the instruction to install the robotic vacuum's charging station.
1. Place the charging station on the floor with the rear side facing the wall.
2. Connect the adaptor to the power supply on the back of the base.
3. Plug in the power cord to the wall socket.
Wind up excessive cord on the back of the base.
4. Make sure there is an empty area of 0.5 m on the sides and 1.5 m in front of the charging base.
Was this article helpful?
Related Articles
- Will I need to use another vacuum cleaner apart from the robotic vacuum?
- What happens if a (new) obstacle gets in the area already mapped by the robotic vacuum?
- Starting the robotic vacuum (App Links)
- Robotic vacuum main brush is not working well
- Robotic vacuum stops while running, with no lights, error message or the display is blank
- Robotic vacuum starts to clean just a specific part of the room
- Robotic vacuum makes noise while cleaning /running
- Robotic vacuum doesn’t charge or doesn't seem to finish charging
- If the robotic vacuum gets stuck (under the bed, between the chairs)
- How to proceed when the robotic vacuum is displaying an error message