Iron Aid tumble dryer displays error message Err
Resolution
Issue:
- Iron Aid tumble dryer displays error message Err
Applies to:
- Iron Aid tumble dryer
Resolution:
1. If the Iron Aid tumble dryer displays error message Err, fill the steam tank up to the MAX. level.
2. If the icons are still flashing, contact an Authorized Service Center.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Tumble dryer emits unpleasant smells
- How to reset WiFi network settings on my AEG dryer
- Tumble dryer displays error message E60 and does not heat up
- Start - Pause LED flashes on tumble dryer
- Tumble dryer displays error message E50
- Tumble dryer does not stop when the cycle is finished
- AEG Tumble dryer stops after a few minutes of the cycle
- Tumble dryer does not heat up
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes
Related Articles
- Tumble dryer emits unpleasant smells
- How to reset WiFi network settings on my AEG dryer
- Tumble dryer displays error message E60 and does not heat up
- Start - Pause LED flashes on tumble dryer
- Tumble dryer displays error message E50
- Tumble dryer does not stop when the cycle is finished
- AEG Tumble dryer stops after a few minutes of the cycle
- Tumble dryer does not heat up
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes