How to set the AutoDose functionality in my AEG washing machine

Issue

How to set the AutoDose functionality in my AEG washing machine

Applies to:

AEG washing machines with AutoDose functionality

Resolution

Depending on the control panel layout of your AEG washing machine, use the following instructions for Autodose setup:

Control panel version 1

7. If no other action will be done, after 10 seconds, the display returns to the program and the AutoDose detergent tank is enabled.

8. Touch Softener tank button (1). The display shows OFF (2).

10. Touch again the softener tank button (1). The display shows tank indicator (2) and the default detergent level (3).

SUMMARY TABLE
	SETTING MODE (1)	STANDARD MODE (2)
DETERGENT TANK	OFF	DEACTIVATE
ON	ACTIVATE/DEACTIVATE
SOFTENER TANK	OFF	DEACTIVATE
ON	ACTIVATE/DEACTIVATE

(1): STATUS OF THE TANK SET DURING THE SETTING MODE

(2): ACTIONS PERMITTED IN THE STANDARD MODE

Control panel version 2

1. To enter in configuration mode, hold pressed the Temperature (1) and the Spin (2) buttons simultaneously for a few seconds until the display shows “SET” (3) on the left in the display and blinking detergent tank (4) and softener tank (5) indicators on the right in the display.

2. Touch detergent tank button (1). The display shows OFF (2).

5. Touch again the detergent tank button (1). The display shows tank indicator (2) and the default detergent level (3).

6. To set basic dosage touch the Temperature button (1) repeatedly to adjust the dosage upwards and the Spin button (2) to adjusts it downwards. The minimum step is 1 ml