How to replace a radiant heater

Resolution

Always refer to the safety information in your product’s user manual before carrying out any repair or maintenance.https://www.electrolux.com/support/user-manuals/

WARNING!RISK OF ELECTRIC SHOCK

Before carrying out any repair or maintenance, switch off the appliance and unplug it from the socket.

WARNING!RISK OF INJURY

Always take care when moving appliances. For heavy appliances it’s safest for two people to move them. Always wear safety gloves and safety footwear. Wear safety gloves at all times to protect against cuts from sharp edges.

WARNING!RISK OF EYE INJURY

Wear safety glasses if you’re doing any maintenance or repair work that involves springs.

WARNING!RISK OF BURNS

Before carrying out any repair or maintenance, make sure the appliance has cooled down.

WARNING!CHOKING HAZARD

Small parts. Not suitable for children under 3 years. Keep all small parts and packaging out of reach of children.

Only adults should use or install the product.

Make sure to use the product only for its intended purpose and check that it’s a compatible part for the product you’re using.

Do not use or install the product if it is damaged.

Please note that repairing it yourself or having it repaired by someone who isn’t a professional can have safety consequences if it’s not done properly and might void the warranty. It’s essential that you have the necessary know-how.

HOW TO REPLACE A RADIANT HEATER

1. Unscrew the glass in all positions on the hob glass. The number and placement of screws may vary depending on the appliance.

2. Unplug all the wires connected to the coil; the number of wires may vary depending on the appliance. Take a photo of the wires before unplugging them.

3. Push the metal parts holding the coil on the metal plate in towards the centre of the coil, then pull the coil up.

4. Push the holding springs up to remove them from the coils; you can use a screwdriver to help.

5. When reassembling, repeat the steps in reverse order.