Washing machine pumps continuously and produces foam
Resolution
Issue:
- Washing machine pumps continuously and produces foam
Applies to:
- Front loader washing machine (integrated and freestanding)
- Top loader washing machine
Resolution:
1. Switch the machine off and clean the drain pump and filter.
If the washing machine pumps continuously and produces foam it indicates, a lot of soap which produces a lot of foam is used, causing the level system can become clogged.
Clean the pump and fluff filter, including the pump blade (if the pump blade is visible, rotate it with a pencil and refit the filter).
For detailed procedure refer to the user manual supplied with your appliance. Download the .
2. Run a hot wash (90 degrees) without any soap in order to flush any soap residues out of the machine.
3. Contact an Authorized Service Center.
If the above suggestions did not solve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- The door of the washing machine cannot be opened
- How to set up AutoDose in the AEG washing machine? (super compact detergent) (video)
- Washing machine’s fluff filter is jammed, cannot be removed
- Laundry is stiff or hard after washing in washing machine
- Washing machine displays error message E80 or emits 8 flashes
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Rust on washing machine's drum
- Connected appliances - The application cannot connect to the appliance
- Washing machine does not heat water, and does not display an error message