Washing machine is drawing in water when switched off
Resolution
If the washing machine draws in water even though it is switched off, it may be caused by dirt in the water valve.
- In many cases, it can be repaired by starting a quick-wash cycle and rinsing water through the valve.
- If the problem persists, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- The door of the washing machine cannot be opened
- Can the washing machine's door be reversed?
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Washing machine does not work / does not react
- AEG washing machine cannot be registered in the app – causes and solutions
- Connected appliances - The application cannot connect to the appliance
- Laundry is stiff or hard after washing in washing machine
- Connected washing machine - application continuously requests a maintenance cycle to be ran
- How to connect your appliance
- Washing machine is leaking water
Related Articles
- The door of the washing machine cannot be opened
- Can the washing machine's door be reversed?
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Washing machine does not work / does not react
- AEG washing machine cannot be registered in the app – causes and solutions
- Connected appliances - The application cannot connect to the appliance
- Laundry is stiff or hard after washing in washing machine
- Connected washing machine - application continuously requests a maintenance cycle to be ran
- How to connect your appliance
- Washing machine is leaking water