Washing machine displays error message E50
Issue
- Washing machine displays error message E50, C9 or F9
Applies to:
- Washing machine
- Washer-dryer
Resolution
1. Contact an authorized service centre to arrange a repair.
Warning: We do not recommend using the device until the problem has been completely fixed. Disconnect the device from the power supply and do not reconnect it until you are sure that all irregularities have been eliminated.
Cause:
- An E50, C9 or F9 message indicates that a motor failure has occurred
Was this article helpful?
Related Articles
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Connected appliances - The application cannot connect to the appliance
- Why is there water or moisture is in my washing machine before the first use?
- The lid on my top load washing machine will not close
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- The door of the washing machine cannot be opened
- Grey marks on laundry after washing in washing machine
- The washing machine drum resists when you try to turn it by hand
- Laundry is stiff or hard after washing in washing machine
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash