Washing machine displays 1- minute pause
Resolution
It is normal for the washing machine to display 1-minute pause for easy care and gentle cycles.
- After a wash cycle, there is an anti-crease cycle which lasts about 30 minutes.
- During this remaining cycle, the display will show 1 minute, for example, and the OFF indicator light will illuminate.
- The laundry may be removed from the machine by pressing the START/PAUSE button.
- Turn the cycle button to off or switch off the machine via the power switch.
- The wash cycle is now complete.
If the above suggestion do not resolve the issue, contact an Authorized Service Center.
Was this article helpful?
Related Articles
- Connected appliances - The application cannot connect to the appliance
- The door of the washing machine cannot be opened
- Washing machine does not work / does not react
- Washing machine stops in the middle of a cycle
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Cleaning the washing machine’s rubber seal if it's dirty
- Washing machine displays message: "Top up salt" and error code EF8
- The "drum cleaning" icon shows on the washing machine display
- How to clean the washing machine detergent drawer
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes