Integrated coffee machine - the coffee isn’t creamy enough
Resolution
Issue
- Integrated coffee machine - the coffee isn’t creamy enough
Applies to
- Integrated coffee machine
Resolution
1. Ensure you are using a coffee type suitable for espresso machines.
2. Turn the knob on the grinder to set the degree of grinding with one click in a counterclockwise direction towards "1".
Note: Turn the button only when the grinder’s motor is operating. Continue one click at a time until the coffee is how you want it. The effect will not be visible until two cups of coffee have been brewed.
3. Contact an Authorized Service Center.
If the above advice do not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- The message "GROUND TOO FINE ADJUST MILL AND PRESS OK" is shown on the display of my integrated coffee machine (video)
- The message "GENERAL ALARM!" is shown on the display of my integrated coffee machine
- The message "EMPTY WASTE COFFEE CONTAINER" is shown on the display of my integrated coffee machine
- Integrated coffee machine makes too less milk foam or has bad frothing (video)
- Integrated coffee machine - the coffee pours out too slowly or one drop at a time
- Integrated coffee machine displays "DESCALE MACHINE BLOCKED" message, coffee cannot be made
- Coffee machine displays message "AIR BUBBLE ALARM"
- How To Get The Best Out Of Your Aeg Coffee Machine
- When I use my integrated coffee machine, the coffee doesn’t taste nice
- Integrated coffee machine - the coffee isn’t hot enough (video)