Cycle indicator light is flashing on the dishwasher
Resolution
If the dishwasher LED is flashing and the programme is not starting:
1. Make sure that the appliance door is fully closed. An audible click should be heard.
2. If the delay start is set, cancel the setting or wait for the end of the countdown.
3. Press and hold the RESET / CANCEL button(s) (normally highlighted on the panel) which should abort the cycle and allows selecting a new one.
Was this article helpful?
Related Articles
- Dishwasher displays error message i30, drains constantly
- Using dishwashing multi-tablets
- Discoloration of silver or aluminium items after washing in the dishwasher
- Dishwasher comfort lift basket stuck in the upper position
- Dishwasher tablets do not fully dissolve
- Dishwasher displays error message i40, i43 or i44
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Dishwasher does not / will not start but the power is on
- How to add rinse aid to your AEG dishwasher
- Before using your AEG dishwasher for the first time