Connected appliances - What configuration has to be set on the router software?
Resolution
Question:
- What configuration has to be set on the router software?
- Can I use connected appliances with 5GHz Wifi network?
Applies to:
- connected appliances:
- washing machine
- tumble dryer
- oven
Answer:
1. Required router settings are as follows:
- Frequency 2.412 – 2.472 GHz for European market (You cannot connect your appliances to a 5GHz WiFi network)
- Protocol IEEE 802.11b/g/n 2x2 radio streams
- Max power < 20 dBm
Was this article helpful?
Related Articles
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine does not heat water, and does not display an error message
- Connected appliances - The application cannot connect to the appliance
- Connected appliances - problems with onboarding
- Washing machine does not spin
- Washing machine displays padlock - AEG
- Washing machine does not work / does not react
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- The door of the washing machine cannot be opened
Related Articles
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine does not heat water, and does not display an error message
- Connected appliances - The application cannot connect to the appliance
- Connected appliances - problems with onboarding
- Washing machine does not spin
- Washing machine displays padlock - AEG
- Washing machine does not work / does not react
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- The door of the washing machine cannot be opened