Compact dishwasher displays error message E1, does not fill with water
Resolution
Issue:
- Compact dishwasher displays error message E1
- The appliance does not fill with water
- Compact dishwasher emits acoustic signal for approximately 30 seconds
Applies to:
- Integrated compact dishwasher
- Free-standing compact dishwasher
Resolution:
1. Make sure that the water tap is open.
2. Make sure that the water tap is not clogged.
3. Make sure that the pressure of the water supply is not too low.
Recommended water pressure is between 0.04-1.0MPa.
For this information, contact your local water authority.
Cause:
- Tap is not open or water intake is restricted or water pressure is too low.
Was this article helpful?
Related Articles
- Dishwasher does not switch on, no light on the panel
- Dishwasher comfort lift basket stuck in the upper position
- My AEG dishwasher basket does not roll freely (video)
- Dishwasher does not / will not start but the power is on
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- How to add salt to your AEG dishwasher
- Cycle indicator light is flashing on the dishwasher
- Dishwasher door does not close
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Unpleasant odour from the dishwasher