Cappuccino unit not working
Issue
Cappuccino unit not working
Resolution
- Consumer to ensure that the unit is placed on a totally flat surface
- Ensure there is water in the tank
- Consumer to remove the steam wand from below the rubber holder and run some air and water through
- Ensure the unit is correctly fitted and all the connections made - the steam lights should illuminate when the unit is correctly fitted
- Ensure all components of the frothing unit are correctly assembled
- If the appliance has not been descaled - the consumer must descale the appliance.
Click on for cleaning / descaling products.
Was this article helpful?
Related Articles
- Blockages - Steam arm - no froth, no water or no steam generated
- Illuminating coffee light flashes very quickly and the coffee is not brewed
- Leaking under the machine or no coffee brewed
- Coffee machines noises
- Slow or water not heating up
- Coffee maker - the milk does not froth
- Coffee maker pump is very noisy and both indicator lights for small and big cups are flashing